|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NICHIA Product Guide Violet Laser Diode NLHV500C 2 1 Features * Optical Output Power: 5mW * Single Transverse Mode * Can Type: 5.6 1. LD Anode 2. PD Anode 3. Common PD LD Absolute Maximum Ratings Item Optical Output Power CW Pulse LD Reverse Voltage PD Reverse Voltage Storage Temperature Operating Case Temperature Symbol Poc Pop Vr (LD) Vr (PD) Tstg Tc Absolute Maximum Ratings 8 10* 5 20 -35 ~ 85 -10 ~ 60 (Tc=25C) Unit mW mW V V C C 3 *: Pulse Condition Pulse Width<1s, Duty<50% Initial Electrical/Optical Characteristics Item Optical Output Power Peak Wavelength** Threshold Current Operating Current Slope Efficiency Operating Voltage FWHM Beam Divergence Angle Position Symbol Po p Ith Iop Vop // // X, Y, Z Min 400 20 25 0.3 3.5 5 21 - (Tc=25C, Po=5mW/CW) Typ. Max Unit 5 mW 405 40 50 0.7 4.5 10 28 410 60 70 1.0 5.5 16 34 2.5 3.0 80 nm mA mA W/A V deg. deg. deg. deg. m Emission Point Accuracy Im 0.2 0.8 mA 0.5 Monitor Current*** ** FWHM < 1nm *** Monitor Current may increase or decrease up to 3% in 24 hours. If your application requires precise output power control, monitor current should not be used as reference for output power. Use additional external PD to monitor output power. All figures in this specification are measured by Nichia's method and may contain measurement deviations. http://www.nichia.co.jp HEAD OFFICE: P.O.BOX 6 ANAN, TOKUSHIMA-KEN 774-8601, JAPAN PHONE: +81-884-22-2311 FAX: +81-884-23-1802 CONTACT TOKYO SALES DEPARTMENT OPTOELECTRONICS PRODUCTS DIV.: 13F TAMACHI CENTER BUILDING, 34-7, SHIBA 5-CHOME, MINATO-KU, TOKYO 108-0014, JAPAN PHONE: +81-3-3456-3108 FAX: +81-3-5440-7330 E-MAIL: laser@tokyo.nichia.co.jp UTZ-SC0002_0 -1- NICHIA CORPORATION NICHIA Typical Characteristics Optical Output Power vs. Forward Current 12 Optical Output Power Po[mW] Product Guide Forward Voltage vs. Forward Current 6 Forward Voltage Vf [V] 10 8 6 4 2 0 0 20 40 60 Forward Current If [mA] 80 Tc=20C Tc=40C Tc=60C 4 Tc=20C Tc=40C Tc=60C 2 0 0 20 40 60 80 Forward Current If [mA] Frequency Response 3 Monitor Current Im [mA] 2 Relative Intensity [dB] 1 0 -1 -2 -3 -4 -5 -6 0.1 1 Frequency [Ghz] 10 Tc=25C Po=5mW Monitor Current vs. Optical Output Power 1.0 0.8 0.6 0.4 0.2 0.0 0 2 4 6 8 10 Optical Output Power Po [mW] CW Tc=25C Spectrum 1.0 0.8 Relative Intensity 0.6 0.4 0.2 0.0 402 404 406 408 Wavelength [nm] Po=5mW/CW Tc=25C Peak Wavelength vs. Case Temperature 410 Peak Wavelength p [nm] 408 406 404 402 400 0 20 40 60 80 Case Temperature Tc [C] UTZ-SC0002_0 -2- NICHIA Top View Product Guide +0 -0.03 Outline Dimension 5.6 4.2 0.2 Bottom View Y + 3.55 0.1 2 1 X + (90) 3 0.40.1 1.00.1 ( 1.6) (0.4) 2.0 0.2 Side View 2.30.2 3.55 0.1 0.250.03 Glass Thickness Connection 2 1 Emitting Point 1.30.08 Reference Plane PD LD 1.20.1 3 6.51.0 3x0.450.1 1. LD Anode 2. PD Anode 3. Common ( ) are reference figures Safety of Laser light Laser light can damage the human eye and the eyes of animals. Do not look at any laser light directly or through any optical lens. When handling a laser diode, do not look directly at the light generated by it. Wear appropriate safety glasses to prevent light from entering the eye by reflection off of another surface. Nichia LDs are classified in Class 3B of IEC60825-1 and 21 CFR Part 1040.10 Safety Standards. It is absolutely necessary to take overall safety measures against User's modules, equipment and systems into which Nichia LDs are incorporated and/or integrated. Operating method Laser diodes are to change forward voltage and light output power due to the fluctuation in temperature etc. They have some tendency to gradually increase electric current necessary to keep the output power constant during their operation. When precise optical output control is required, it is recommended to use an external photo diode to monitor output power and use APC (Automatic Power Control) function in the operating circuit. Cautions on LD handling Static Electricity and surge damage the LDs. It is recommended to use a wrist strap or anti-electrostatic glove when handling the Product. Nichia LDs described in this brochure are intended to be used for ordinary electronic equipment (such as office equipment, communications equipment, measurement instruments and household appliances). Consult Nichia's sales staff in advance for information on the applications in which exceptional quality and reliability are required, particularly when the failure or malfunction of the LDs may directly jeopardize life or health (such as for airplanes, aerospace, submersible repeaters, nuclear reactor control systems, automobiles, traffic control equipment, life support systems and safety devices). The specifications of the Product may be modified for improvement without prior notice. The formal specifications must be exchanged and signed by both parties before a user starts mass production. Strictly prohibited are reverse engineering and disassembly concerning, but not limited to, structure and composition of the Product. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. UTZ-SC0002_0 -3- |
Price & Availability of NLHV500C |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |